Ashley Sling,alloy chain slings
home About Ashley Sling alloy chain sling inspection Contact Site Map
ALLOY CHAIN SLINGS, WIRE ROPE SLINGS , RIGGING
HARDWARE, FALL PROTECTION, HOISTS and more . . .
arrow
 Alloy Chain Slings
arrow Grab IQ Alloy Chain Slings
arrow Wire Rope Slings
arrow Nylon Web Slings
arrow Polyester Round Slings
arrow High Performance Round Slings
arrow Wire Mesh Slings
arrow TUFF-ASH ® Sling Protection Products
arrow Linton Magnetic Sling Protectors
arrow Crosby Rigging Hardware
arrow Wire Rope
arrow Samson Synthetic Rope
arrow Hoists
arrow Fall Protection
arrow Fall Protection for Tools
arrow Netting Systems
arrow Tie Down Equipment
arrow Plate Clamps
arrow Lifting Beams
arrow Load Testing Equipment
arrow Lifting Magnets
arrow Training Seminars
arrow OSHA Regulations & Guidelines
arrow Klein Iron Workers Tools
arrow Safety Products

WALKER MAGNETICS
<Back  
NEO Series   |    BUX BM² Series    |  CER Series

CER Series - ELECTROMAGNETIC LIFTING MAGNETS

CER SeriesA CER magnet, pound for pound, is the least costly, but most powerful magnet available. Due to the deep penetration of the magnetic field, it is less susceptible to adverse surface conditions than any other self-contained magnet.

CER magnets are ideally suited for in-plant handling of steel plate, flat stock, castings, forgings, or machined components in all types of industrial plants, machine shops, fabricating shops and steel warehouses. Handling of loose parts such as nuts and bolts is also a popular application for the CER-16 and CER-20.

The maximum rated lift capacity is based upon lifting clean, smooth, flat, low-carbon steel plate of ample thickness with the full area of the magnet's lifting surface in contact with the load. De-rating is required for plates with rust or scale, thin plates, and alloy steels. More detailed ratings are contained in the operators manual and safety instructions

Uses

  • In-plant handling of steel plate, flat stock, castings, forgings, or machined components in all types of industrial plants, machine shops, and steel warehouses.
  • Handling of loose parts, such as nuts or bolts

Standard Features and Benefits

  • High strength steel bail
  • Recessed "ON-OFF-RELEASE" switch is protected against accidental operation
  • Low-carbon steel body for maximum magnetic performance
  • Heavy-duty, fully moisture-protected coils; 50% duty cycle
  • Operating light indicates "ON" condition of magnet
  • Built-in solid state rectifier permits operation from 115 volt AC outlet
  • Coiled cord and twist lock adapter for quick connection to AC supply
  • Mating twist lock receptacle provided for your installation convenience

Specs

SPECIFICATIONS
Model Power Required at 115/1/60 Watts Net Weight
Diameter Height To Hook
Performance Rating on AISI 1020 Steel
CER-5 92 22 5.125” 9.75” 0 - 600 lbs.
CER-7 135 41 6.75” 11.25” 0 - 1,200 lbs.
CER-9 208 90 9” 11.75” 0 - 2,400 lbs.
CER-12 420 140 12” 13.625” 0 - 4,000 lbs.
CER-16 495 340 16” 14.5” 0 - 7,250 lbs.
CER-20 1050 575 20” 15” 0 - 10,500 lbs.
Sizes available from 600 to 10,500 lbs. rated lift and from 5 1/8 to 20 inches diameter

 

 

  spacer
Atlanta, GA
404-691-2604
Slings Atlanta, GA
Charlotte, NC
704-347-0071
Slings Charlotte NC
Chattanooga, TN
423-867-9380
Slings Chattanooga
Columbus, MS
662-328-4040
Slings, Columbus
Knoxville, TN
865-675-1225
Slings Knoxville, TN
Nashville, TN
615-259-5121
Sling Nashville, TN