wire rope slings, alloy chain slings  
Home    Contact     About Us    Inspection Criteria  Site Map    E-mail   
 
Wire Rope Slings
Alloy Chain Slings
GrabiQ Alloy Chain Slings
Nylon Web Slings
Round Slings
Wire Mesh Slings
Load Testing Equipment
Winch Lines
Wire Rope
Rigging Hardware
Fall Protection
Netting Systems        
Hoists           
Special Lifting Devices
Cargo Securement
Plate Clamps              
Ironworkers Tools                    
Safety Supplies                   
  Lifting Magnets
  Training

IRONWORKERS TOOLS - KLEIN TOOLS
 
Erection Wrench, for U.S. Heavy Nut

• Forged from select alloy steel to withstand high-leverage and heavy loads.
• Extra-heavy-duty head area gives maximum strength and durability.
• Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or
   hole sizes without binding.
• Extra-large hub area works on larger diameter holes than other wrenches.
• Catalog number, bolt size and nominal opening size are stamped on every wrench for easy
   identification.
• American Bridge design.

Cat. No Bolt Size Head Width Nominal Opening Nut Type Overall Length Taper Diameter Weight (lbs.)
3212 3/4" 2-1/2" 1-1/4" U.S. heavy 16-5/8" 1" to 1/4" 1.98
3213 7/8" 3" 1-7/16" U.S. heavy 17-3/8" 1-1/8" to 9/32" 2.72
3214 1" 3-5/8" 1-5/8" U.S. heavy 18" 1-1/8" to 1/4" 3.36
               
 
Drive Ratcheting Construction Wrench

 • Accepts 1/2" square-drive hex socket.
• Reversible ratchet.
• Eliminates the need for carrying several fixed-size wrenches.
• Forged from select alloy steel with continuous-taper handle for aligning bolt holes.
• Industrial black finish for corrosion resistance.
Cat. No Length Maximum Size Weight (lbs.)
3238 15"   (381) 15"   (381) 2.10
3239 16"   (406) 1-1/2"    (38) 2.36
       
 
Round Bar

• Provides extra leverage when positioning steel members and aligning bolt holes.
• Forged fit-up bar is pointed on one end.
• Chisel-end is at a 15° angle to give even greater leverage
Cat. No Diameter Length Weight (lbs.)
3247 3/4"  (19) 24"    (610) 2.50
3248 7/8"    (22) 30"    (762) 4.30
       
 
Bull Pin, Broad Head

• Forged, heat-treated bull pin increases efficiency by providing a larger striking surface.
• Head design also reduces chance of pin slipping from the hand when aligning holes.
• Angled head and smooth blending of radii increase strength and reduce the danger of chipping.
• Below the head, squared-off shoulders have been forged to provide a surface for applying
 wrench to loosen wedged bull pins.
• Long, even taper reduces binding and hang-up.
• Added resistance to "mushrooming" permitting much longer use than is possible with
  conventional designs.
• Heat-treated for strength.
• Black finish for rust resistance.

Cat. No Length Point Diameter Top Diameter Weight (lbs.)
3255 13-3/4"
(349) 		5/16"
(8) 		1-1/4"
(32) 		2.90
3256 10"
(254) 		1/4"
(6) 		1-1/16"
(27) 		1.60
 

Barrel-Type Drift Pin

• Machined from quality alloy steel.
• Tapers are uniform and blend into body diameter.
• Tough, forged steel will properly end-pein in use.
• Heat-treated for strength.
• Black finish for rust resistance

Cat. No Maximum
Diameter		 Overall
Lenght		 Point
Diameter		 Weight (lbs.)
3260 11/16"
(18) 		7-1/2"
(191) 		5/16"
(8) 		.60
3261
 13/16"
(21)
8"
(203)
7/16"
(11)
.85


 
   
  Atlanta, GA
404-691-2604
 Charlotte, NC
704-347-0071
 Chattanooga, TN
423-867-9380
   Columbus, MS
662-328-4040		 Knoxville, TN
865-675-1225
 Nashville, TN
615-259-5121
 Norcross, GA
770-409-4551