|
Point
Load Hook
Harrington
offers a special hook for the 1 1/2 and 3 Ton LB lever hoists
that is designed to accommodate point loading. This hook is
popular in ship and rail yards, where pulling operations can
result in hook point loading.
Top
Hook Extenders
LB
lever hoists are available with a top hook extender that locates
the hoist body aawy from its attachment point. The top hook
extender is 18 inches long and is available for 3/4 through
3 Ton LB lever hoists.
Load
Limit Warning Handle
An LB lever hoist equipped with a load limit warning
handle alerts the operator when the hoist is being used to
lift damaging loads beyond rated capacity. The load limit
warning handle signals the operator in three ways:
• Sight: The green signal changes to red.
• Feel: The load handle deflects 15-degrees.
• Sound: The handle emits a click when deflected.
The handle resets when you operate the hoist in the down direction.
Inspection
Hooks
Harrington's inspection hook is suitable for applications
where inspection of the internal parts of the hook set is
required. The inspection hook uses the standard Harrington
hook set and is assembled with high-strength locking fasteners
instead of rivets. Inspection hooks are available in top and
bottom versions for single fall of rivets. Inspection hooks
are available in top and bottom versions for single fall of
rivets. Inspection hooks are available in top and bottom versions
for single fall LB, CB, CF, an NTH model hoists.
LB
Optional Accessories
 | 
