| Permanent Ceramic Lift Magnet for Flat Steel Applications
IMI’s new BasicLift™ Magnet is a powerful, no frills permanent ceramic lift magnet perfect for basic, flat steel lifting applications. Featuring a lightweight and durable Stainless Steel design, the BasicLift™ has a full width cam to release the magnet from the steel surface and a tall lift lug for easy use with crane hooks and slings.
The BasicLift™ offers a good value for your dollar with strong lifting capacity and basic lifting features.
- Full width cam release
- Large lift lug
- Light weight Design
- Durable Stainless Steel casing
- Heat resistant up to 300°F (148°C)
- 2:1 Design Factor
- Made In USA
| Lift Capacity* (LBS.) |
Length (IN.) |
Width (IN.) |
Height (IN.) |
Handle (IN.) |
Weight (LBS.) |
Catalog Number |
| 400 |
6-1/2 |
6-1/2 |
5 |
5-7/8 |
13 |
BL0400 |
| 1,000 |
9-1/2 |
6-1/2 |
5 |
6-7/8 |
18 |
BL1000 |
| 1,500 |
13-3/4 |
6-1/2 |
5 |
6-3/4 |
28 |
BL1500 |
| *Lift Capacity Values Are Stated At 50% Of The Actual Value. See Holding Value & Maximum Sheet Length Chart Below. |
| HOLDING VALUE (LBS.) & **MAXIMUM SHEET LENGTH (Due to Sag for Material Thickness for Single Magnet Use) |
| Catalog Number |
3/16" (6' Long) |
1/4" (6' Long) |
3/8" (8' Long) |
1/2" (8' Long) |
3/4" (8' Long) |
1" (10' Long) |
| BL0400 |
212 |
272 |
360 |
400 |
400 |
400 |
| BL1000 |
530 |
680 |
900 |
1000 |
1000 |
1000 |
| BL1500 |
795 |
1000 |
1500 |
1500 |
1500 |
1500 |
NOTE: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift and the load need to be clean & free of chips, oil, slag, dirt, etc. Lifts must be centered on the load. Not recommended for painted or finish coated surfaces. We recommend when lifting sheets over 8’ long that you use 2 or more lifts. **Maximum sheet lengths are selected due to the sag characteristics of the specified sheet. |
